dishnet error codes

[IPfreely]

found this on the net thought someone could use it mods if it's already posted here plez nuke it


DishNet Error Codes and Fixes..

002 The satelite has lost the signal, please use up or down key.
... No signal being recieved. Could be that Sat moved, bad weather, New spot beam has removed signal from your area, bad cable connections, Bad switch
004 check switch
005 Your smart card does not currently have authorization to view or purchase this program.
... Give it time, it will eventually get the new decrypt keys
009
013 This is a subscription channel which has not been purchased.
015 Acquring satellite signal. Please wait.
019 The smartcard is not inserted correctly.
... Either cam looped, in IRD wrong, or making bad contact
020 The smartcard currently inserted is not valid for this receiver.
... The Wrong ird number was put on the card
021 Smartcard is not inserted into the receiver.
... Put smart card in. If your cards in you have a hardware problem
022 Your receiver has not yet been authorized .
... Your IRD # and boxkeys are 00'd out or wrong or you ird status byte is set at 80 (Suspended) needs to be set at 00 (normal)
023 Unable to acquire program guide information.
... No satallite signal
024 unable to read from memory
025 satellite signal has been lost
043
053
061 Vital programming will now be downloaded into your receiver. Do not disturn or unplug it.
081 Dialing out. please wait.
083 Dial-out failure. The receiver is unable to dialout.
104 A serious problem has been detected in your receiver . Please call: 1-888-884-3759
303 Your receivers memory is now being programmed. Do not disturb or unplug your ird while the green froint panel light is blinking.
150 "A SERIOUS PROBLEM HAS BEEN DETECTED WITH YOUR RECIEVER: PLEASE CALL 1-800-334-7496."
... Your ird's firmware is detecting the lock, unlock or go back with your irds firmware... DO NOT CALL
151 "A SERIOUS PROBLEM HAS BEEN DETECTED WITH YOUR RECIEVER: PLEASE CALL 1-800-334-7496."
... Usually do to a bad lock installation or the old lock installation, turn off IRD and unplug. Check for info on how to correct before doing anything. DO NOT CALL
152 "A SERIOUS PROBLEM HAS BEEN DETECTED WITH YOUR RECIEVER: PLEASE CALL 1-800-334-7496."
... You have been hit by an ECM targeting the EEPROM, turn off IRD and unplug. Check for info on how to correct before doing anything. DO NOT CALL
153 "A SERIOUS PROBLEM HAS BEEN DETECTED WITH YOUR RECIEVER: PLEASE CALL 1-800-334-7496."
... You have been hit by an ECM targeting the TSOP, turn off IRD and unplug. Check for info on how to correct before doing anything. DO NOT CALL
155 outdated tsop hard lock nag
...Your ird's firmware is detecting the lock, unlock or go back with your irds firmware... DO NOT CALL
349 "You are attempting to use a version of smartcard that is incompatible with this receiver."
... IRD firmware is anti Rom2/Rom3/Rom10... need to do the VIDMOD

There is one close, but I dont think it has this many..There is one posted by Plp forsure, maybe they could merge the two into one sticky. Nice post Freely

[hairyballs520]

does this go for Icams 2 ?? cause i know 022 isnt right think its internal communtication error

[DJHotLatino]

022 Your receiver has not yet been authorized .
... Your IRD # and boxkeys are 00'd out or wrong or you ird status byte is set at 80 (Suspended) needs to be set at 00 (normal)
I have this problem can somebody tell me how can I fix it